|
Mainsheet traveler -
Lewmar size 2
2022-
The bearing in the end stops are made of some kind of plastic that did
not last for long so we had to find a better solution. We planned first
to get them custome made but when we bought
the saloon table tension ring
we saw that the same company sold bearings in bronze that was of
same size as the Lewmar originals.
Since this
is not a complicated procedure, or difficult to understand what has been
done, we let the pictures talk to them selves.
|
 |
Materials used:
Sintered bronze/Oil bronze bushing from MecMove
AB, Sweden.
Product no. SI 08/14x16 (16mm high, 14mm wide and 8mm hole)
Price per 2024-05-14 27,50 SEKSupplier: MecMove
AB, Skogås, Stockholm +46 8 520 140 00.
Website:
click here
Sizes:
click here 2026-10-30 From Lewmar Technical
Support Manager
In the traveller: 47 Torlon balls on each side (94 in
total). A visible gap is required to allow the balls to circulate
correctly around the raceway and to prevent them from becoming
overloaded or binding during operation
The balls: PN 29172021 - SZ2 Torlon ball spares x 100.
Diameter: 7,8 mm or 5/16".
NB!: When picking out the balls, use a bucket
with a towel. They bounce like nothing else and are very, very expensive
per each. I have understood that Harkens Torlon balls are much, much
cheaper but I havent checked if Harken has the same size of balls. |